Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › ACCELERATOR PEDAL › from 2015.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255021 ACCELERATOR PEDAL A

3UR-FE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 55606 1.REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 78110K 2.REMOVE ACCELERATOR PEDAL ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal assembly.

If applied, the accelerator pedal assembly must be replaced.


a.
A374277

Disconnect the accelerator pedal position sensor connector.


b.

Remove the 2 nuts and accelerator pedal assembly.