Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › MASS AIR FLOW METER
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255022 MASS AIR FLOW METER G

3UR-FE ENGINE CONTROL  MASS AIR FLOW METER  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER

a.

Check the mass air flow value.

i.

Connect the intelligent tester to the DLC3.


ii.

Turn the engine switch on (IG).


iii.

Turn the intelligent tester main switch on.


iv.

Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / mass air flow meter.


v.
A165593E01
0.96,1.424 1.179,1.588 0.219,0.164 10 Air

Blow air into the mass air flow meter, and check that the mass air flow meter value fluctuates.

If the result is not as specified, check the mass air flow meter (See page Engine / Hybrid System>3UR-FE (ENGINE CONTROL)>MASS AIR FLOW METER>INSPECTION), or wiring and ECM (See page Engine / Hybrid System>3UR-FE (ENGINE CONTROL)>SFI SYSTEM(w/o Secondary Air Injection System)>P0102).