Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › SFI SYSTEM(w/o Secondary Air Injection System) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255032 SFI SYSTEM C

3UR-FE ENGINE CONTROL  SFI SYSTEM  P0617  Starter Relay Circuit High  


DESCRIPTION

While the engine is being cranked, the positive battery voltage is applied to terminal STA of the ECM. If the ECM detects the Starter Control (STA) signal while the vehicle is being driven, it determines that there is a malfunction in the STA circuit. The ECM then illuminates the MIL and stores the DTC.

This monitor runs when the vehicle is driven at 20 km/h (12.4 mph) for over 20 seconds.

DTC Code DTC Detection Condition Trouble Area
P0617 When conditions (a), (b) and (c) are met, and a positive (+B) battery voltage of 10.5 V or higher is applied to the ECM for 20 seconds (1 trip detection logic).

(a) The vehicle speed is 20 km/h (12.4 mph) or more.

(b) The engine speed is 1000 rpm or more.

(c) The STA signal is ON.


·

Park/Neutral Position (PNP) switch

·

Starter relay circuit

·

Engine switch

·

ECM



WIRING DIAGRAM

A180644E31
5.677,2.49 6.135,2.646 0.458,0.156 10 false STSW 5.677,2.792 6.135,2.948 0.458,0.156 10 false ACCR 5.677,3.167 6.135,3.323 0.458,0.156 10 false STAR 2.469,2.49 2.927,2.646 0.458,0.156 10 false STSW 2.469,2.833 2.927,2.99 0.458,0.156 10 false ACCR 2.51,3.167 2.969,3.323 0.458,0.156 10 false STR2 2.594,3.51 2.969,3.667 0.375,0.156 10 false STR 4.74,1.583 5.031,1.76 0.292,0.177 10 false IGN 2.948,0.427 3.219,0.583 0.271,0.156 10 false IG2 1.99,0.604 2.625,0.781 0.635,0.177 10 false IG2 MAIN 2.135,1.479 3.24,1.667 1.104,0.188 10 false Integration Relay 2.563,2.167 2.927,2.344 0.365,0.177 10 false IG2D 2.01,3.885 3.021,4.073 1.01,0.188 10 false Main Body ECU 4.927,4.146 5.469,4.302 0.542,0.156 10 false ST CUT 2.729,5.583 4.604,5.75 1.875,0.167 10 false Park/Neutral Position Switch 1.625,4.49 1.854,4.646 0.229,0.156 10 false ST 5.698,5.229 6.073,5.406 0.375,0.177 10 false NSW 5.698,5.802 6.01,5.958 0.313,0.156 10 false STA 5.917,6.542 6.271,6.708 0.354,0.167 10 false ECM 3.427,6.854 3.646,7.01 0.219,0.156 10 false ST 4.719,7.604 5.188,7.781 0.469,0.177 10 false Starter 1.042,8.031 1.542,8.229 0.5,0.198 10 false Battery 5.344,2.49 5.656,2.646 0.313,0.156 10 false A38 5.344,2.833 5.656,2.99 0.313,0.156 10 false A38 5.344,3.167 5.656,3.323 0.313,0.156 10 false C45 5.344,5.271 5.656,5.427 0.313,0.156 10 false C45 5.344,5.844 5.656,6 0.313,0.156 10 false A38 5.375,2.323 5.583,2.49 0.208,0.167 10 false 14 5.396,2.667 5.583,2.823 0.188,0.156 10 false 41 5.385,3 5.573,3.156 0.188,0.156 10 false 16 5.354,5.094 5.625,5.25 0.271,0.156 10 false 120 5.385,5.656 5.573,5.813 0.188,0.156 10 false 46 4.74,3.74 4.844,3.885 0.104,0.146 10 false 2 4.74,4.51 4.844,4.656 0.104,0.146 10 false 1 4.417,3.729 4.542,3.896 0.125,0.167 10 false 5 4.417,4.521 4.542,4.688 0.125,0.167 10 false 3 3.885,6.438 4.01,6.604 0.125,0.167 10 false 3 2.729,5.438 3.01,5.604 0.281,0.167 10 false C24 3.885,5.156 3.99,5.313 0.104,0.156 10 false 4 3.125,5.146 3.229,5.302 0.104,0.156 10 false 5 3.125,6.448 3.229,6.604 0.104,0.156 10 false 5 1.354,4.396 1.458,4.552 0.104,0.156 10 false 1 3.115,6.146 3.219,6.302 0.104,0.156 10 false 2 4.094,7.198 4.198,7.354 0.104,0.156 10 false 1 4.479,7 4.583,7.156 0.104,0.156 10 false 1 1.354,4.656 1.469,4.823 0.115,0.167 10 false 2 4.531,1.458 4.635,1.615 0.104,0.156 10 false 1 4.531,1.708 4.646,1.875 0.115,0.167 10 false 2 3.896,6.146 4.01,6.313 0.115,0.167 10 false 1 4.354,7.198 4.563,7.354 0.208,0.156 10 false D2 4.01,7.396 4.344,7.552 0.333,0.156 10 false D16 3.042,3.51 3.229,3.667 0.188,0.156 10 false E1 3.031,3.167 3.24,3.323 0.208,0.156 10 false E4 3.031,2.49 3.24,2.646 0.208,0.156 10 false E4 3.031,2.156 3.24,2.313 0.208,0.156 10 false E2 3.031,2.833 3.24,2.99 0.208,0.156 10 false E2 3.042,1.99 3.219,2.146 0.177,0.156 10 false 11 3.083,2.323 3.208,2.479 0.125,0.156 10 false 4 3.083,2.667 3.208,2.823 0.125,0.156 10 false 3 3.083,3 3.208,3.156 0.125,0.156 10 false 6 3.083,3.333 3.208,3.49 0.125,0.156 10 false 8 3.625,0.75 3.833,0.896 0.208,0.146 10 false 1B 3.625,1.094 3.833,1.24 0.208,0.146 10 false 1B 1.615,1.083 1.823,1.229 0.208,0.146 10 false 1B 1.615,0.75 1.823,0.896 0.208,0.146 10 false 1C 1.656,0.573 1.771,0.729 0.115,0.156 10 false 1 1.667,0.917 1.771,1.063 0.104,0.146 10 false 7 3.677,0.583 3.792,0.729 0.115,0.146 10 false 8 3.677,0.917 3.792,1.063 0.115,0.146 10 false 6

CAUTION / NOTICE / HINT

HINT:
·

The following troubleshooting flowchart is based on the premise that the engine is cranked normally.

If the engine will not crank, proceed to the Problem Symptoms Table (See page Engine / Hybrid System>3UR-FE (ENGINE CONTROL)>SFI SYSTEM(w/o Secondary Air Injection System)>PROBLEM SYMPTOMS TABLE).

·

Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.



PROCEDURE

1.READ VALUE USING INTELLIGENT TESTER (STARTER SIGNAL)
a.

Connect the intelligent tester to the DLC3.


b.

Turn the engine switch on (IG) and turn the tester on.


c.

Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Starter Signal.


d.

Check the value displayed on the tester when the engine switch is turned to the START positions.

OK:
Engine Switch Position Starter Signal
On (IG) OFF
START ON




OK

NG

2.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
2.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY

OK

3.CHECK HARNESS AND CONNECTOR (PNP SWITCH - ECM)

NG

3.CHECK HARNESS AND CONNECTOR (PNP SWITCH - ECM)
a.

Disconnect the C24 PNP switch connector.


b.

Disconnect the A38 ECM connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
C24-5 - A38-46 (STA) Always Below 1 Ω
C24-5 or A38-46 (STA) - Body ground Always 10 kΩ or higher




OK

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR