Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › SFI SYSTEM(w/o Secondary Air Injection System) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255032 SFI SYSTEM C

3UR-FE ENGINE CONTROL  SFI SYSTEM  P060A  Internal Control Module Monitoring Processor Performance  


DESCRIPTION

The main CPU and sub CPU of the ECM perform data communication between each other. The main CPU monitors the communications and WDC pulses from the sub CPU. When the signal malfunctions below are detected, a DTC is stored.

DTC Code DTC Detection Condition Trouble Area
P060A When one of the following conditions is met:
·

An ECM main CPU error.

·

An ECM sub CPU error.

·

An electronic throttle monitoring CPU error.


ECM

PROCEDURE

1.CHECK DTC

b.

Turn the engine switch off.


c.

Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.


d.

Connect the cable to the negative (-) battery terminal.


e.

Turn the engine switch on (IG).


f.

Check DTC.

OK:

P060A is not output.




OK

NG