Home › Engine / Hybrid System › 3UR-FE (ENGINE CONTROL) › SFI SYSTEM(w/o Secondary Air Injection System) › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052775 3UR-FE ENGINE CONTROL _0255032 SFI SYSTEM C

3UR-FE ENGINE CONTROL  SFI SYSTEM  P060E  Internal Control Module Throttle Position Performance  


DESCRIPTION

The ECM monitors the input signals of the Throttle Position (TP) sensor No. 1 and stop light switch. As the ECM monitors the input signals of the TP sensor No. 1 and the STP signals of the stop light switch, if the input signals and control signals are deviated, a DTC is stored.

DTC Code DTC Detection Condition Trouble Area
P060E When either condition below is met:
·

An ECM main CPU error.

·

An ECM sub CPU error.


ECM

PROCEDURE

1.CHECK DTC

b.

Turn the engine switch off.


c.

Disconnect the cable from the negative (-) battery terminal and wait for 1 minute.


d.

Connect the cable to the negative (-) battery terminal.


e.

Turn the engine switch on (IG).


f.

Check DTC.

OK:

P060E is not output.




OK

NG