11381A
1.INSTALL REAR CRANKSHAFT OIL SEAL
Apply MP grease to the lip of a new rear crankshaft oil seal.
Do not allow foreign matter to contact the lip of the oil seal.
Do not allow MP grease to contact the dust seal.
Using SST and a hammer, tap in the rear crankshaft oil seal until its surface is flush with the rear oil seal retainer edge.
Keep the lip free from foreign matter.
Do not tap the rear crankshaft oil seal at an angle.
32101
2.INSTALL DRIVE PLATE AND RING GEAR SUB-ASSEMBLY
35000
3.INSTALL AUTOMATIC TRANSMISSION ASSEMBLY