Home › Engine / Hybrid System › 1VD-FTV (ENGINE MECHANICAL) › FRONT CRANKSHAFT OIL SEAL › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052779 1VD-FTV ENGINE MECHANICAL _0255068 FRONT CRANKSHAFT OIL SEAL A

1VD-FTV ENGINE MECHANICAL  FRONT CRANKSHAFT OIL SEAL  INSTALLATION  


PROCEDURE

Hide 11381A 1.INSTALL FRONT CRANKSHAFT OIL SEAL

a.

Apply engine oil to the lip of a new oil seal.


b.
U163087E02
2.24,4.302 2.115,4.302 2.115,4.302 1.917,4 false 2.323,4.229 2.635,4.375 0.313,0.146 10 false SST 0.771,2.073 0.896,2.219 0.125,0.146 10 false A

Using SST and a hammer, tap in the oil seal as shown in the illustration.

SST
09316-12010  
09950-70010  (09951-07100)
09950-60020  (09951-00890)

Standard depth A:

0.6 to 1.4 mm (0.0236 to 0.0551 in.)


NOTICE:

Make sure that the lip of the oil seal is properly installed.



Hide 13471 2.INSTALL CRANKSHAFT PULLEY SUB-ASSEMBLY

Hide 16400 3.INSTALL RADIATOR ASSEMBLY