Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PRESSURE PULSATION DAMPER
RM2660E _51 Engine / Hybrid System _052780 1GR-FE FUEL _0255078 FUEL PRESSURE PULSATION DAMPER A

1GR-FE FUEL  FUEL PRESSURE PULSATION DAMPER  INSTALLATION  


PROCEDURE

Hide 23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY

a.
A225470E01
2.683,0.395 2.856,0.558 0.173,0.163 10 *1 2.649,0.486 2.507,0.486 2.507,0.486 2.143,1.014 false

Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper.

Text in Illustration
*1 New O-Ring


b.

Install the fuel pressure pulsation damper to the fuel delivery pipe.


c.

Install the fuel pressure regulator holder.


Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).