Home › Engine / Hybrid System › 1UR-FE (FUEL) › FUEL PUMP › 2014.08–2016.08
RM2660E _51 Engine / Hybrid System _052782 1UR-FE FUEL _0255100 FUEL PUMP A

1UR-FE FUEL  FUEL PUMP  INSTALLATION  


PROCEDURE

Hide 77020A 1.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

a.

Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.


b.
A176324E02
1.671,2.162 1.849,2.348 0.178,0.186 10 *1 1.671,2.653 1.867,2.824 0.195,0.170 10 *2 1.653,2.247 1.526,2.247 1.526,2.247 1.179,2.466 false 1.087,2.74 1.644,2.74 false

Install the fuel suction with pump and gauge tube assembly into the fuel tank.

Text in Illustration
*1 Protrusion
*2 Groove
V100135

Front

NOTICE:

Be careful not to bend the arm of the fuel sender gauge.


HINT:

Align the protrusion of the fuel suction with pump and gauge tube assembly with the groove of the fuel tank.



c.

Put the fuel pump gauge retainer on the fuel tank. While holding the fuel suction with pump and gauge tube assembly, tighten the fuel pump gauge retainer 1 complete turn by hand.


d.
A242908E01
2.604,0.124 2.910,0.305 0.306,0.181 10 SST 2.557,0.207 2.276,0.207 2.276,0.207 2.055,0.453 false

Set SST on the fuel pump gauge retainer.

SST
09808-14030  

HINT:
·

Hold the fuel suction with pump and gauge tube assembly upright by hand to make sure that the fuel suction tube gasket is not moved out of position.

·

Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

·

Install SST while pressing the claws of SST against the fuel pump gauge retainer (toward the center of SST).




e.
U156937E03
1.042,3.844 1.094,3.927 0.052,0.083 2.417,0.302 2.271,0.302 2.271,0.302 2.042,0.583 false 1.615,3.26 2.635,3.469 2.635,3.469 2.635,3.625 true 1.24,3.396 1.135,3.292 1.135,3.292 0.875,3.292 false 1.938,1.927 2.073,1.927 2.073,1.927 2.198,1.833 false 2.458,0.219 2.76,0.375 0.302,0.156 10 false SST 2.542,3.646 2.74,3.823 0.198,0.177 10 false *2 0.646,3.198 0.833,3.365 0.188,0.167 10 false *1 1.219,4.01 1.344,4.156 0.125,0.146 10 false A 1.74,1.844 1.938,2.021 0.198,0.177 10 false *1

Using SST, tighten the fuel pump gauge retainer until the mark on the fuel pump gauge retainer is within range A on the fuel tank as shown in the illustration.

SST
09808-14030  

Text in Illustration
*1 Fuel Tank Side Mark
*2 Fuel Pump Gauge Retainer Side Mark

HINT:

Fit the tips of SST onto the ribs of the fuel pump gauge retainer.



Hide 77100U 2.INSTALL FUEL TANK SUB-ASSEMBLY