Home › Engine / Hybrid System › 1UR-FE (FUEL) › FUEL TANK › 2014.08–2015.08
RM2660E _51 Engine / Hybrid System _052782 1UR-FE FUEL _0255101 FUEL TANK A

1UR-FE FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77697 1.INSTALL NO. 1 FUEL TANK HEAT INSULATOR

a.

Install the No. 1 fuel tank heat insulator with the 4 clips.


b.

Install the fuel tube clamp to the No. 1 fuel tank heat insulator.


Hide 77213B 2.INSTALL FUEL TANK TO FILLER PIPE HOSE

a.
A176439E04
1.021,2.39 1.227,2.579 0.206,0.189 10 *a 2.358,2.866 2.561,3.047 0.203,0.181 10 *b 0.976,2.473 0.798,2.473 0.798,2.473 1.069,3.336 false 2.312,2.951 2.134,2.951 2.134,2.951 1.485,3.645 false

Install the fuel tank to filler pipe hose to the fuel tank sub-assembly as shown in the illustration and tighten the hose clamp.

Text in Illustration
*a Fuel Tank Side Mark
*b Hose Side Mark

HINT:
·

Align the fuel tank side mark with the hose side mark when installing the hose.

·
A176441E07
2.777,0.77 2.981,0.952 0.203,0.183 10 *a 2.736,0.858 2.57,0.858 2.57,0.858 2.57,1.44 false

Tighten the hose clamp until the end of the hose clamp contacts the stopper as shown in the illustration.



Text in Illustration
*a Stopper


Hide 77020A 3.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

Hide 4.INSTALL FUEL TANK MAIN TUBE, FUEL TANK RETURN TUBE AND NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

a.
A384210E02
0.948,0.875 0.688,0.5 0.688,0.5 0.542,0.5 false 0.948,1.188 0.719,1.333 true 0.948,1.333 0.5,1.333 false 1.604,0.99 2.135,0.99 false 0.396,0.427 0.625,0.625 0.229,0.198 10 false *1 0.313,1.25 0.542,1.448 0.229,0.198 10 false *2 2.156,0.927 2.521,1.375 0.365,0.448 10 true *3 0.719,4.219 0.948,4.417 0.229,0.198 10 false *a 2.406,4.219 2.635,4.417 0.229,0.198 10 false *b

Install the 3 fuel tube joints with the 3 tube joint clips.

NOTICE:
·

Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joints are inserted securely.

·

Check that the tube joint clips are on the collars of the fuel tube joints.

·

After installing the tube joint clips, check that the fuel tube joints cannot be pulled off.



Text in Illustration
*1 Fuel Tube Joint
*2 O-Ring
*3 Tube Joint Clip
*a CORRECT
*b INCORRECT


b.

for G.C.C. Countries:

i.

Attach the 2 clamps and install the No. 2 fuel tank main tube sub-assembly.


ii.

Attach the clamp and install the fuel tank return tube sub-assembly.


iii.

Attach the clamp and install the fuel tank main tube sub-assembly.



c.

except G.C.C. Countries:

i.

Attach the 2 clamps and install the No. 2 fuel tank main tube sub-assembly.


ii.

Attach the clamp and install the fuel tank return tube sub-assembly.


iii.

Attach the clamp and install the fuel tank main tube sub-assembly.



Hide 77259E 5.CONNECT FUEL HOSE (for Double Tank Type)

a.

for G.C.C. Countries:

Install the fuel hose to the fuel suction tube sub-assembly, and slide the clip to secure the hose.


Hide 6.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY AND FUEL TANK RETURN TUBE SUB-ASSEMBLY (for Single Tank Type)

a.
A384210E02
0.948,0.875 0.688,0.5 0.688,0.5 0.542,0.5 false 0.948,1.188 0.719,1.333 true 0.948,1.333 0.5,1.333 false 1.604,0.99 2.135,0.99 false 0.396,0.427 0.625,0.625 0.229,0.198 10 false *1 0.313,1.25 0.542,1.448 0.229,0.198 10 false *2 2.156,0.927 2.521,1.375 0.365,0.448 10 true *3 0.719,4.219 0.948,4.417 0.229,0.198 10 false *a 2.406,4.219 2.635,4.417 0.229,0.198 10 false *b

Install the 2 fuel tube joints with the 2 tube joint clips.

NOTICE:
·

Check that there are no scratches or foreign objects on the connecting parts.

·

Check that the fuel tube joints are inserted securely.

·

Check that the tube joint clips are on the collars of the fuel tube joints.

·

After installing the tube joint clips, check that the fuel tube joints cannot be pulled off.



Text in Illustration
*1 Fuel Tube Joint
*2 O-Ring
*3 Tube Joint Clip
*a CORRECT
*b INCORRECT


b.

Attach the clamp and install the fuel tank return tube sub-assembly.


c.

Attach the clamp and install the fuel tank main tube sub-assembly.


Hide 77100U 7.INSTALL FUEL TANK SUB-ASSEMBLY

a.

Set the fuel tank sub-assembly on an engine lifter and raise the fuel tank sub-assembly.

NOTICE:

Do not allow the fuel tank sub-assembly to contact the vehicle, especially the differential.



b.

Raise the engine lifter.


c.

Install the 2 fuel tank band sub-assemblies with the 2 pins and 2 clips.


d.

Connect the 2 fuel tank band sub-assemblies with the 2 bolts.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 8.CONNECT FUEL TANK TO FILLER PIPE HOSE (for Double Tank Type)

a.
A181358E04
1.026,3.307 1.166,3.307 1.166,3.307 1.737,3.584 false 1.811,2.55 1.992,2.721 0.181,0.171 10 *a 2.496,3.249 2.709,3.441 0.213,0.193 10 *c 2.097,3.578 2.34,3.344 2.34,3.344 2.456,3.344 false 0.791,3.225 0.991,3.412 0.199,0.187 10 *b

Connect the fuel tank to filler pipe hose to the fuel tank to filler pipe sub-assembly as shown in the illustration and tighten the hose clamp.

Text in Illustration
*a 0 to 0.3 mm (0 to 0.0118 in.)
*b Fuel Tank to Filler Pipe Hose Side Mark
*c Fuel Tank Inlet Pipe Side Mark

HINT:
·

Install the hose so that the distance between the fuel tank inlet pipe side mark and fuel tank to filler pipe hose side mark is 0 to 0.3 mm (0 to 0.0118 in.) as shown in the illustration.

·
A176441E07
2.777,0.77 2.981,0.952 0.203,0.183 10 *a 2.736,0.858 2.57,0.858 2.57,0.858 2.57,1.44 false

Tighten the hose clamp until the end of the hose clamp contacts the stopper as shown in the illustration.



Text in Illustration
*a Stopper


Hide 9.CONNECT FUEL TANK TO FILLER PIPE HOSE (for Single Tank Type)

a.
A181359E03
1.877,2.609 2.052,2.790 0.175,0.180 10 *a 2.539,3.32 2.716,3.477 0.177,0.157 10 *c 2.14,3.649 2.383,3.415 2.383,3.415 2.5,3.415 false 0.862,3.291 1.040,3.469 0.179,0.178 10 *b 1.075,3.375 1.215,3.375 1.215,3.375 1.786,3.652 false

Connect the fuel tank to filler pipe hose to the fuel tank to filler pipe sub-assembly as shown in the illustration and tighten the hose clamp.

Text in Illustration
*a 0 to 0.3 mm (0 to 0.0118 in.)
*b Fuel Tank to Filler Pipe Hose Side Mark
*c Fuel Tank Inlet Pipe Side Mark

HINT:
·

Install the hose so that the distance between the fuel tank inlet pipe side mark and fuel tank to filler pipe hose side mark is 0 to 0.3 mm (0 to 0.0118 in.) as shown in the illustration.

·
A176441E07
2.777,0.77 2.981,0.952 0.203,0.183 10 *a 2.736,0.858 2.57,0.858 2.57,0.858 2.57,1.44 false

Tighten the hose clamp until the end of the hose clamp contacts the stopper as shown in the illustration.



Text in Illustration
*a Stopper


Hide 10.CONNECT FUEL TANK BREATHER TUBE (for Double Tank Type)

a.
A310191E01
1.694,2.237 1.880,2.417 0.186,0.181 10 *1 1.641,2.328 1.509,2.328 1.509,2.328 1.257,2.558 false

Connect the fuel tank breather tube to the fuel tank to filler pipe sub-assembly and push the retainer.

Text in Illustration
*1 Retainer
V100135

Push

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 11.CONNECT FUEL TANK BREATHER TUBE (for Single Tank Type)

a.
A310192E01
1.933,2.284 2.126,2.475 0.193,0.190 10 *1 1.908,2.364 1.752,2.364 1.752,2.364 1.554,2.718 false

Connect the fuel tank breather tube to the fuel tank to filler pipe sub-assembly and push the retainer.

Text in Illustration
*1 Retainer
V100135

Push

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 12.CONNECT NO. 2 FUEL TANK BREATHER TUBE (for Double Tank Type)

a.
A310193E01
2.608,3.232 2.801,3.406 0.193,0.174 10 *2 2.75,0.239 2.943,0.413 0.193,0.174 10 *1 1.473,2.771 1.667,2.945 0.193,0.174 10 *4 2.639,3.865 2.832,4.039 0.193,0.174 10 *3 1.032,3.504 1.225,3.678 0.193,0.174 10 *5 2.608,2.9 2.801,3.074 0.193,0.174 10 *1 2.728,0.337 2.566,0.337 2.566,0.337 2.347,0.655 false 2.585,3.329 2.323,3.329 false 2.585,2.997 2.465,2.997 2.465,2.997 2.201,3.26 false 1.691,2.853 1.898,2.853 1.898,2.853 2.038,3.045 false 1.25,3.598 1.374,3.598 1.374,3.598 1.491,3.911 false 2.175,3.601 2.686,3.601 2.686,3.601 2.686,3.833 false 2.175,3.756 2.686,3.756 false

except G.C.C. Countries:

i.

Connect the No. 2 fuel tank breather tube and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



Text in Illustration
*1 Retainer
*2 Connector
*3 O-Ring
*4 Pipe
*5 Nylon Tube
V100135

Push

HINT:

Push the parts together firmly until a "click" sound is heard.



ii.

Attach the fuel tube clamp.



Hide 77252A 13.CONNECT NO. 2 FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

A310194E03
1.396,0.677 1.292,0.677 1.292,0.677 1.104,0.927 true 4.563,0.385 4.458,0.385 4.458,0.385 4.292,0.604 true 3.031,3.115 3.125,3.115 3.125,3.115 3.26,3.417 false 3.688,3.188 4.042,3.188 4.042,3.188 4.042,3.427 true 3.698,3.292 4.031,3.292 false 3.792,2.885 3.979,2.885 false 3.708,2.771 3.917,2.563 true 3.917,2.563 4.01,2.563 false 3.385,2.552 3.51,2.552 3.51,2.552 3.604,2.677 false 4.052,2.49 4.25,2.677 0.198,0.188 10 false *1 2.865,3.021 3.063,3.208 0.198,0.188 10 false *5 3.198,2.479 3.396,2.667 0.198,0.188 10 false *4 3.958,3.438 4.156,3.625 0.198,0.188 10 false *3 4,2.833 4.198,3.021 0.198,0.188 10 false *2 3.615,0.052 3.813,0.24 0.198,0.188 10 false *b 0.281,0.052 0.479,0.24 0.198,0.188 10 false *a 1.448,0.594 1.646,0.781 0.198,0.188 10 false *1 4.594,0.313 4.792,0.5 0.198,0.188 10 false *1

Text in Illustration
*1 Retainer *2 Connector
*3 O-Ring *4 Pipe
*5 Nylon Tube - -
*a except G.C.C. Countries *b for G.C.C. Countries
V100135

Push - -

a.

Connect the No. 2 fuel tank main tube sub-assembly and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 14.CONNECT FUEL HOSE (for Double Tank Type)

a.

for G.C.C. Countries:

i.

Connect the fuel hose to the pipe, and slide the clip to secure the hose.


ii.

Attach the fuel tube clamp.



Hide 77027B 15.CONNECT NO. 1 FUEL EMISSION TUBE SUB-ASSEMBLY (for Double Tank Type)

a.
A310195E01
0.304,2.798 0.490,2.965 0.186,0.167 10 *4 1.008,4.128 1.194,4.296 0.186,0.167 10 *2 1.275,2.581 1.461,2.748 0.186,0.167 10 *3 2.602,2.747 2.788,2.914 0.186,0.167 10 *5 1.234,2.669 1.097,2.669 1.097,2.669 1.097,3.205 false 0.513,2.887 0.63,2.887 0.63,2.887 0.679,3.311 false 2.571,2.833 2.47,2.833 2.47,2.833 2.296,3.176 false 1.097,4.091 1.097,3.753 false 2.812,0.248 2.998,0.416 0.186,0.167 10 *1 2.772,0.337 2.634,0.337 2.634,0.337 2.432,0.633 false

except G.C.C. Countries:

i.

Connect the No. 1 fuel emission tube sub-assembly and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



Text in Illustration
*1 Retainer
*2 Connector
*3 O-Ring
*4 Pipe
*5 Nylon Tube
V100135

Push

HINT:

Push the parts together firmly until a "click" sound is heard.



ii.

Attach the fuel tube clamp.



b.
A310196E01
0.245,3.09 0.431,3.257 0.186,0.167 10 *2 1.984,4.135 2.170,4.302 0.186,0.167 10 *5 0.904,4.216 1.090,4.383 0.186,0.167 10 *4 1.425,2.843 1.611,3.011 0.186,0.167 10 *1 2.767,2.972 2.953,3.140 0.186,0.167 10 *3 1.385,2.932 1.248,2.932 1.248,2.932 1.004,3.366 false 0.454,3.178 0.571,3.178 0.571,3.178 0.62,3.602 false 2.736,3.058 2.635,3.058 2.635,3.058 2.461,3.402 false 0.992,4.178 0.992,3.938 false 1.943,4.215 1.471,4.215 1.471,4.215 1.471,3.821 false 1.601,3.821 1.601,4.215 false 1.802,0.147 1.988,0.314 0.186,0.167 10 *1 1.762,0.236 1.624,0.236 1.624,0.236 1.398,0.519 false

for G.C.C. Countries:

i.

Connect the No. 1 fuel emission tube sub-assembly and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



Text in Illustration
*1 Retainer
*2 Pipe
*3 Nylon Tube
*4 Connector
*5 O-Ring
V100135

Push

HINT:

Push the parts together firmly until a "click" sound is heard.



ii.

Attach the fuel tube clamp.



Hide 16.CONNECT FUEL TANK RETURN TUBE (for Double Tank Type)

A310197E01
2.273,2.633 2.459,2.801 0.186,0.167 10 *2 3.969,3.497 4.155,3.665 0.186,0.167 10 *5 3.049,3.579 3.235,3.746 0.186,0.167 10 *4 3.275,2.433 3.461,2.600 0.186,0.167 10 *1 4.627,2.538 4.813,2.705 0.186,0.167 10 *3 3.242,2.505 3.13,2.505 3.13,2.505 2.932,2.858 false 2.444,2.706 2.54,2.706 2.54,2.706 2.579,3.051 false 4.601,2.608 4.52,2.608 4.52,2.608 4.377,2.888 false 3.121,3.549 3.121,3.352 false 3.936,3.563 3.551,3.563 3.551,3.563 3.551,3.241 false 3.7,3.241 3.7,3.563 false 2.537,0.395 2.723,0.562 0.186,0.167 10 *1 2.504,0.467 2.392,0.467 2.392,0.467 2.205,0.666 false 5.319,0.239 5.505,0.407 0.186,0.167 10 *1 5.286,0.312 5.174,0.312 5.174,0.312 4.987,0.511 false 0.266,0.071 0.452,0.238 0.186,0.167 10 *a 3.61,0.071 3.796,0.238 0.186,0.167 10 *b

Text in Illustration
*1 Retainer *2 Pipe
*3 Nylon Tube *4 Connector
*5 O-Ring - -
*a except G.C.C. Countries *b for G.C.C. Countries
V100135

Push - -

a.

Connect the fuel tank return tube and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 77204A 17.CONNECT FUEL TANK RETURN TUBE (for Single Tank Type)

a.
A310198E01
0.303,2.96 0.489,3.127 0.186,0.167 10 *2 2.105,4.034 2.291,4.201 0.186,0.167 10 *5 0.976,4.134 1.162,4.302 0.186,0.167 10 *4 1.498,2.723 1.684,2.890 0.186,0.167 10 *1 2.913,2.857 3.099,3.024 0.186,0.167 10 *3 1.458,2.812 1.32,2.812 1.32,2.812 1.077,3.245 false 0.512,3.049 0.63,3.049 0.63,3.049 0.678,3.473 false 2.881,2.943 2.781,2.943 2.781,2.943 2.574,3.277 false 1.065,4.097 1.065,3.846 false 2.065,4.114 1.592,4.114 1.592,4.114 1.592,3.72 false 1.727,3.72 1.727,4.114 false 2.169,0.229 2.355,0.396 0.186,0.167 10 *1 2.129,0.318 1.991,0.318 1.991,0.318 1.753,0.605 false

Connect the fuel tank return tube and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



Text in Illustration
*1 Retainer
*2 Pipe
*3 Nylon Tube
*4 Connector
*5 O-Ring
V100135

Push

HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 18.CONNECT NO. 2 FUEL TANK BREATHER HOSE (for Double Tank Type)

a.

for G.C.C. Countries:

i.

Connect the No. 2 fuel tank breather hose to the pipe, and slide the clip to secure the hose.


ii.

Attach the fuel pipe clamp.



Hide 19.CONNECT NO. 2 FUEL TANK BREATHER TUBE (for Single Tank Type)

a.
A310199E01
0.297,2.914 0.483,3.082 0.186,0.167 10 *2 1.982,3.974 2.168,4.142 0.186,0.167 10 *5 0.931,4.06 1.117,4.227 0.186,0.167 10 *4 1.394,2.653 1.580,2.821 0.186,0.167 10 *1 2.789,2.787 2.975,2.954 0.186,0.167 10 *3 1.354,2.742 1.216,2.742 1.216,2.742 0.973,3.176 false 0.506,3.003 0.623,3.003 0.623,3.003 0.672,3.427 false 2.758,2.873 2.658,2.873 2.658,2.873 2.483,3.217 false 1.02,4.022 1.02,3.782 false 1.941,4.054 1.469,4.054 1.469,4.054 1.469,3.66 false 1.604,3.66 1.604,4.054 false 1.285,0.154 1.471,0.322 0.186,0.167 10 *1 1.245,0.243 1.107,0.243 1.107,0.243 0.881,0.535 false

Connect the No. 2 fuel tank breather tube and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



Text in Illustration
*1 Retainer
*2 Pipe
*3 Nylon Tube
*4 Connector
*5 O-Ring
V100135

Push

HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 20.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Double Tank Type)

A310200E01
2.272,2.631 2.458,2.799 0.186,0.167 10 *2 3.968,3.495 4.154,3.663 0.186,0.167 10 *5 3.048,3.577 3.234,3.744 0.186,0.167 10 *4 3.274,2.43 3.460,2.598 0.186,0.167 10 *1 4.626,2.535 4.812,2.703 0.186,0.167 10 *3 3.241,2.503 3.129,2.503 3.129,2.503 2.931,2.856 false 2.443,2.704 2.538,2.704 2.538,2.704 2.578,3.049 false 4.6,2.605 4.519,2.605 4.519,2.605 4.376,2.886 false 3.12,3.546 3.12,3.35 false 3.935,3.56 3.55,3.56 3.55,3.56 3.55,3.239 false 3.699,3.239 3.699,3.56 false 2.503,0.35 2.689,0.517 0.186,0.167 10 *1 2.47,0.422 2.358,0.422 2.358,0.422 2.207,0.671 false 3.597,0.065 3.783,0.233 0.186,0.167 10 *b 0.267,0.065 0.453,0.233 0.186,0.167 10 *a 5.465,0.314 5.651,0.481 0.186,0.167 10 *1 5.432,0.386 5.32,0.386 5.32,0.386 5.168,0.635 false

Text in Illustration
*1 Retainer *2 Pipe
*3 Nylon Tube *4 Connector
*5 O-Ring - -
*a except G.C.C. Countries *b for G.C.C. Countries
V100135

Push - -

a.

Connect the fuel tank main tube sub-assembly and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 77209C 21.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (for Single Tank Type)

a.
A310201E01
0.139,2.964 0.325,3.132 0.186,0.167 10 *2 2.219,4.024 2.405,4.192 0.186,0.167 10 *5 1.09,4.124 1.276,4.292 0.186,0.167 10 *4 1.368,2.718 1.554,2.885 0.186,0.167 10 *1 3.027,2.847 3.213,3.014 0.186,0.167 10 *3 1.328,2.807 1.191,2.807 1.191,2.807 0.947,3.24 false 0.349,3.053 0.466,3.053 0.466,3.053 0.515,3.477 false 2.995,2.933 2.895,2.933 2.895,2.933 2.72,3.277 false 1.179,4.087 1.179,3.846 false 2.179,4.104 1.707,4.104 1.707,4.104 1.707,3.71 false 1.89,3.71 1.89,4.104 false 1.642,0.211 1.828,0.379 0.186,0.167 10 *1 1.602,0.3 1.464,0.3 1.464,0.3 1.322,0.55 false

Connect the fuel tank main tube sub-assembly and push the retainer.

NOTICE:
·

Before installing the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.

·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.



Text in Illustration
*1 Retainer
*2 Pipe
*3 Nylon Tube
*4 Connector
*5 O-Ring
V100135

Push

HINT:

Push the parts together firmly until a "click" sound is heard.



b.

Attach the fuel tube clamp.


Hide 77606 22.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY

a.

Install the No. 1 fuel tank protector sub-assembly with the 5 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 77310A 23.INSTALL FUEL TANK CAP ASSEMBLY

Hide 58329F 24.INSTALL REAR FLOOR NO. 2 SERVICE HOLE COVER

a.

Connect the fuel pump and fuel sender gauge connector.


b.

Install the rear floor No. 2 service hole cover with new butyl tape.


c.

w/ Rear Air Conditioning System:

Install the air duct and 2 screws.


Hide 58510D 25.INSTALL FRONT FLOOR CARPET ASSEMBLY

Hide 62520P 26.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

Hide 62510P 27.INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH

Hide 28.INSTALL REAR NO. 2 SEAT ASSEMBLY

Hide 71300S 29.INSTALL REAR NO. 1 SEAT ASSEMBLY RH (for 60/40 Split Seat Type 40 Side)

Hide 71400S 30.INSTALL REAR NO. 1 SEAT ASSEMBLY LH (for 60/40 Split Seat Type 60 Side)

Hide 31.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 32.ADD FUEL