Home › Engine / Hybrid System › 1UR-FE (FUEL) › FUEL PUMP › 2014.08–2016.08
RM2660E _51 Engine / Hybrid System _052782 1UR-FE FUEL _0255100 FUEL PUMP A

1UR-FE FUEL  FUEL PUMP  REMOVAL  


PROCEDURE

Hide 77100U 1.REMOVE FUEL TANK SUB-ASSEMBLY

Hide 77020A 2.REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

a.
A242908E01
2.604,0.124 2.910,0.305 0.306,0.181 10 SST 2.557,0.207 2.276,0.207 2.276,0.207 2.055,0.453 false

Set SST on the fuel pump gauge retainer.

SST
09808-14030  

HINT:
·

Engage the claws of SST securely with the fuel pump gauge retainer holes to secure SST.

·

Install SST while pressing the claws of SST against the fuel pump gauge retainer (towards the center of SST).




b.
A242907E01
1.117,0.161 1.443,0.321 0.326,0.159 10 SST 1.499,0.246 1.68,0.246 1.68,0.246 1.865,0.819 false

Using SST, loosen the fuel pump gauge retainer.

SST
09808-14030  

Text in Illustration
V100135

Turn

NOTICE:
·

When the fuel pump gauge retainer is loosened, be careful as the pump and gauge tube will spring upward from the force of the spring.

·

Remove foreign matter around the fuel suction with pump and gauge before this operation.



HINT:

Fit the tips of SST onto the ribs of the fuel pump gauge retainer.



c.

Remove the fuel pump gauge retainer.


d.

Remove the fuel suction with pump and gauge tube assembly from the fuel tank.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge.



e.

Remove the gasket from the fuel tank.