Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL PUMP › 2014.08–2016.08
RM2660E _51 Engine / Hybrid System _052783 1VD-FTV FUEL _0255117 FUEL PUMP A

1VD-FTV FUEL  FUEL PUMP  INSTALLATION  


PROCEDURE

Hide 77020A 1.INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

a.

Apply a light coat of gasoline or grease to a new gasket, and install it to the fuel tank.


b.
A176324E07
1.656,2.281 1.521,2.281 1.521,2.281 1.177,2.5 false 1.083,2.771 1.646,2.771 false 1.667,2.198 2.323,2.344 0.656,0.146 10 false Protrusion 1.667,2.688 2.156,2.833 0.49,0.146 10 false Groove 2.885,1.5 3.344,1.781 0.458,0.281 10 true Front

Install the fuel suction with pump and gauge tube into the fuel tank.

NOTICE:

Be careful not to bend the arm of the fuel sender gauge.


HINT:

Align the protrusion of the fuel suction with pump and gauge tube with the groove of the fuel tank.



c.

Put the retainer on the fuel tank. While holding the fuel suction with pump and gauge tube, tighten the retainer one complete turn by hand.


d.
A260062E01
0.671,0.043 0.969,0.187 0.299,0.144 10 SST 1.036,0.116 1.16,0.116 1.16,0.116 1.315,0.328 false

Set SST on the retainer.

SST
09808-14030  

HINT:
·

Hold the fuel suction tube assembly upright by hand to ensure that the fuel suction tube gasket is not moved out of position.

·

Securely attach the claws of SST to the protrusions of the retainer and fix SST in place.

·

Install SST while pressing the claws of SST against the retainer (toward the center of SST).




e.
U163448E02
2.448,0.24 2.302,0.24 2.302,0.24 2.115,0.594 false 1.635,3.25 2.646,3.458 2.646,3.458 2.646,3.615 true 1.198,3.427 1.021,3.427 false 1.771,1.927 1.906,1.927 1.906,1.927 2.198,1.844 false 2.49,0.156 2.792,0.313 0.302,0.156 10 false SST 2.125,3.625 3,3.948 0.875,0.323 10 false Retainer Side Mark 0.323,3.313 0.99,3.635 0.667,0.323 10 false Fuel Tank Side Mark 1.26,3.979 1.385,4.125 0.125,0.146 10 false A 0.458,1.844 1.813,2.219 1.354,0.375 10 true Fuel Tank Side Mark

Using SST, tighten the retainer until the mark on the retainer is within range A on the fuel tank as shown in the illustration.

SST
09808-14030  

HINT:

Fit the tips of SST onto the ribs of the retainer.



Hide 77100U 2.INSTALL FUEL TANK SUB-ASSEMBLY