Home › Engine / Hybrid System › 1UR-FE (EMISSION CONTROL) › AIR SWITCHING VALVE(for Bank 1)
RM2660E _51 Engine / Hybrid System _052785 1UR-FE EMISSION CONTROL _0255137 AIR SWITCHING VALVE(for Bank 1) A

1UR-FE EMISSION CONTROL  AIR SWITCHING VALVE(for Bank 1)  INSTALLATION  


PROCEDURE

Hide 25710 1.INSTALL AIR SWITCHING VALVE ASSEMBLY

a.
A266181E02
3.167,0.177 3.052,0.177 3.052,0.177 2.771,0.542 true 1.542,0.875 1.979,0.875 true 1.771,0.219 2.646,0.219 2.646,0.219 2.552,0.771 true 3.208,0.094 3.385,0.271 0.177,0.177 10 false *1 1.594,0.135 1.771,0.313 0.177,0.177 10 false *2 1.333,0.813 1.51,0.99 0.177,0.177 10 false *3

Install a new gasket and the air switching valve with the 3 bolts.

Torque:
24 N*m (245 kgf*cm, 18 ft.*lbf)

Text in Illustration
*1 No. 4 Air Tube
*2 Claw
*3 Air Switching Valve

NOTICE:

Make sure the gasket's claws are not caught between the air switching valve and No. 4 air tube.



b.

Install the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the wire harness clamp bracket with the bolt.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 17342 2.CONNECT NO. 2 AIR INJECTION SYSTEM HOSE

a.
A266182E02
1.469,1.406 1.573,1.406 1.573,1.406 1.656,0.823 true 1.573,0.344 1.688,0.344 1.688,0.344 1.896,0.667 true 1.406,0.271 1.573,0.448 0.167,0.177 10 false *1 1.292,1.323 1.51,1.563 0.219,0.24 10 true *2

Connect the No. 2 air injection system hose.

Text in Illustration
*1 Protrusion
*2 Paint Mark

HINT:

Make sure the direction of the hose clamp is as shown in the illustration.



b.

Connect the connector.