Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR(for DPF) › from 2015.08
RM2660E _51 Engine / Hybrid System _052786 1VD-FTV EMISSION CONTROL _0255154 EXHAUST GAS TEMPERATURE SENSOR(for DPF) A

1VD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for DPF)  REMOVAL  


PROCEDURE

Hide 17450B 1.REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY

Hide 89425C 2.REMOVE NO. 4 EXHAUST GAS TEMPERATURE SENSOR

A271254E01
0.059,0 0.247,0.208 0.188,0.208 10 *A 0.059,2.103 0.247,2.311 0.188,0.208 10 *B

NOTICE:

If the sensor is dropped, replace it with a new one.


Text in Illustration
*A for Bank 1
*B for Bank 2

a.

Using a 14 mm union nut wrench, remove the 2 No. 4 exhaust gas temperature sensors.


Hide 18460 3.REMOVE MONOLITHIC CONVERTER ASSEMBLY

Hide 89425 4.REMOVE EXHAUST GAS TEMPERATURE SENSOR

A271252E01
0.078,0.026 0.289,0.192 0.211,0.166 10 *A 0.078,2.598 0.289,2.765 0.211,0.166 10 *B

NOTICE:

If the sensor is dropped, replace it with a new one.


Text in Illustration
*A for Bank 1
*B for Bank 2

a.

Using a 14 mm union nut wrench, remove the 2 exhaust gas temperature sensors.


Hide 89425A 5.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR (for Bank 1)

A271253

NOTICE:

If the sensor is dropped, replace it with a new one.


a.

Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.


Hide 89425B 6.REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR (for Bank 2)

A271315

NOTICE:

If the sensor is dropped, replace it with a new one.


a.

Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.