Home › Engine / Hybrid System › 1GR-FE (COOLING) › THERMOSTAT
RM2660E _51 Engine / Hybrid System _052792 1GR-FE COOLING _0255185 THERMOSTAT A

1GR-FE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16031 1.INSTALL WATER INLET WITH THERMOSTAT

a.

Install a new gasket and the water inlet with thermostat with the 3 nuts.

Torque:
9.0 N*m (92 kgf*cm, 80 in.*lbf)


Hide 16572D 2.CONNECT NO. 2 RADIATOR HOSE

a.

Connect the No. 2 radiator hose.


Hide 51405A 6.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53806 7.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 8.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH