Home › Engine / Hybrid System › 1UR-FE (LUBRICATION) › ENGINE OIL COOLER › from 2015.08
RM2660E _51 Engine / Hybrid System _052797 1UR-FE LUBRICATION _0255212 ENGINE OIL COOLER A

1UR-FE LUBRICATION  ENGINE OIL COOLER  REMOVAL  


PROCEDURE

Hide 16400 1.REMOVE RADIATOR ASSEMBLY

Hide 88320 2.DISCONNECT COOLER COMPRESSOR ASSEMBLY

Hide 83520 5.REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY

Hide 16278K 6.REMOVE NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY

Hide 15781 7.REMOVE NO. 1 OIL COOLER BRACKET

a.
A272590

Remove the 2 nuts and bracket.


b.

Disconnect the ground wire from the cylinder block.


Hide 15671 8.REMOVE OIL FILTER BRACKET

a.
A162469

Remove the 2 bolts, 2 nuts and filter bracket.


b.
A162470

Remove the 2 O-rings.


Hide 15710 9.REMOVE OIL COOLER ASSEMBLY

a.
A162471

Remove the 5 nuts and oil cooler from the oil filter bracket.


b.
A162475

Remove the 2 O-rings.


Hide 15788 10.REMOVE OIL COOLER SPACER

a.
A162472

Remove the bolt and oil cooler spacer from the oil filter bracket.


b.
A162474E07
2.229,0.76 2.635,0.448 2.635,0.448 2.74,0.448 true 2.76,0.354 2.927,0.521 0.167,0.167 10 false *1

Remove the gasket.

Text in Illustration
*1 Gasket