Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › ENGINE OIL COOLER
RM2660E _51 Engine / Hybrid System _052798 1GR-FE LUBRICATION _0255217 ENGINE OIL COOLER A

1GR-FE LUBRICATION  ENGINE OIL COOLER  INSTALLATION  


PROCEDURE

Hide 15710 1.INSTALL OIL COOLER ASSEMBLY

a.

Install a new seal washer to the bolt.


b.

Install the oil cooler with the bolt and nut.

Torque:
for bolt : 68 N*m (693 kgf*cm, 50 ft.*lbf)
for nut : 10 N*m (102 kgf*cm, 7 ft.*lbf)


c.
A224741E03
2.896,1.177 3.073,1.344 0.177,0.167 10 true *a 2.542,1.51 2.719,1.677 0.177,0.167 10 true *b

Install the 2 hoses.

Text in Illustration
*a Upward
*b Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



Hide 16206 3.CONNECT WATER BY-PASS PIPE SUB-ASSEMBLY

a.
A224742E04
2.917,1.156 3.083,1.323 0.167,0.167 10 true *a 2.583,1.458 2.75,1.625 0.167,0.167 10 true *b

Connect the 2 hoses and water by-pass pipe.

Text in Illustration
*a Upward
*b Rearward

HINT:

The direction of the hose clamp is indicated in the illustration.



b.

Install the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 51405A 10.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53805 11.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 53806 12.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH