Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052798 1GR-FE LUBRICATION _0255219 OIL LEVEL SENSOR A

1GR-FE LUBRICATION  OIL LEVEL SENSOR  INSTALLATION  


PROCEDURE

Hide 89491 1.INSTALL ENGINE OIL LEVEL SENSOR

a.

Install a new gasket to the engine oil level sensor.


b.

Install the sensor with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the connector.


Hide 51442 5.INSTALL NO. 2 ENGINE UNDER COVER

a.

Install the No. 2 engine under cover with the 2 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 51405A 6.INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 53805 7.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 53806 8.INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH