Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL LEVEL SENSOR
RM2660E _51 Engine / Hybrid System _052798 1GR-FE LUBRICATION _0255219 OIL LEVEL SENSOR A

1GR-FE LUBRICATION  OIL LEVEL SENSOR  REMOVAL  


PROCEDURE

Hide 53806 1.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH

Hide 53805 2.REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH

Hide 51405A 3.REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

Hide 51442 4.REMOVE NO. 2 ENGINE UNDER COVER

a.
A178462

Remove the 2 bolts and No. 2 engine under cover.


Hide 89491 6.REMOVE ENGINE OIL LEVEL SENSOR

a.

Disconnect the connector.


b.
A221160

Remove the 4 bolts and sensor.


c.
A216760E01
2.54,0.632 2.692,0.790 0.152,0.158 10 *1 2.687,0.154 2.625,0.632 2.625,0.632 2.8,0.253 false 2.444,0.253 2.625,0.632 2.625,0.632 2.552,0.154 false 2.533,1.064 2.685,1.222 0.152,0.158 10 *2

Cut away part of the gasket and remove the gasket from the engine oil level sensor.

Text in Illustration
*1 Cutting Position
*2 Supply Part

HINT:

Remove only the outer part of the gasket.