11363A
1.INSTALL FLYWHEEL HOUSING SIDE COVER
28100
2.INSTALL STARTER ASSEMBLY
Install the starter with the 2 bolts.
Connect the starter wire with the nut.
Connect the terminal cap.
Connect the starter connector.
Connect the ground wire with the bolt.
28192
3.INSTALL STARTER COVER
Install the starter cover with the 3 bolts.
17105
4.INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH
5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).