Home › Drivetrain › AE80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › PARK / NEUTRAL POSITION SWITCH › from 2015.08
RM2660E _52 Drivetrain _052807 AE80F AUTOMATIC TRANSMISSION / TRANSAXLE _0255293 PARK / NEUTRAL POSITION SWITCH A

AE80F AUTOMATIC TRANSMISSION / TRANSAXLE  PARK / NEUTRAL POSITION SWITCH  REMOVAL  


PROCEDURE

Hide 17410 1.REMOVE FRONT EXHAUST PIPE ASSEMBLY

Hide 58155 2.REMOVE NO. 3 FRONT FLOOR HEAT INSULATOR

a.
C344062

Remove the 4 nuts and No. 3 front floor heat insulator.


Hide 33702B 3.DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

C329048

a.

Remove the clip and pin, and disconnect the floor shift gear shifting rod sub-assembly from the transmission control shaft lever.


Hide 84540 4.REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY

a.
C329049

Disconnect the switch connector.


b.
C329050

Remove the nut, spring washer and transmission control shaft lever.


c.
C337031

Remove the bush from the transmission control shaft lever.


d.
C337032

Remove the No. 1 floor shift bush from the transmission control shaft lever.


e.
C329051E06
1.208,0.74 1.333,0.74 1.333,0.74 1.823,1.333 true 2.083,1.469 2.76,1.469 true 2.354,0.615 2.26,0.615 2.26,0.615 1.896,1 true 1,0.667 1.177,0.854 0.177,0.188 10 true *1 2.771,1.375 2.99,1.583 0.219,0.208 10 true *2 2.396,0.531 2.573,0.719 0.177,0.188 10 false *a

Using a screwdriver, bend the tabs of the lock washer.

HINT:

Tape the screwdriver tip before use.


Text in Illustration
*1 Lock Washer
*2 Lock Nut
*a Protective Tape


f.

Remove the lock nut and lock washer.


g.
C329052

Remove the 2 bolts and park/neutral position switch assembly.

HINT:

Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.