Home › Drivetrain › AE80F (AUTOMATIC TRANSMISSION / TRANSAXLE) › SHIFT LEVER › from 2015.08
RM2660E _52 Drivetrain _052807 AE80F AUTOMATIC TRANSMISSION / TRANSAXLE _0255295 SHIFT LEVER A

AE80F AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

U156486E04
0.75,1.104 0.865,1.26 0.115,0.156 10 false 3 2.667,0.229 2.781,0.385 0.115,0.156 10 false 4 2.802,1.042 2.917,1.198 0.115,0.156 10 false 2 0.865,0.083 0.979,0.24 0.115,0.156 10 false 1

a.

Install the transmission floor shift assembly with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)

Text in Illustration
V100135

Bolt
V100136

Connector


b.

Connect the 3 connectors.


Hide 33702B 2.CONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY

C337020E01
0.809,0.084 0.937,0.256 0.128,0.172 10 P 1.325,0.218 1.465,0.376 0.140,0.158 10 R 1.682,0 1.810,0.172 0.128,0.172 10 N

a.

Turn the transmission control shaft lever of the park/neutral position switch counterclockwise until it stops, and then turn it clockwise 2 notches to set it to the N position.


b.

Move the shift lever to N.


c.
C337021E01
1.417,0.16 1.617,0.359 0.200,0.199 10 *a 2.424,0.261 1.647,0.261 false

Temporarily install the floor shift gear shifting rod sub-assembly to the transmission floor shift assembly with the nut.


d.

Tighten the nut while lightly pushing the lever rearward.

Torque:
13 N*m (130 kgf*cm, 9 ft.*lbf)

Text in Illustration
*a Lever
V100135

Nut
V100136

Push


Hide 3.INSTALL FRONT CONSOLE BOX (w/o Cool Box)