1.REMOVE OIL PUMP O-RING
Remove the oil pump O-ring from the oil pump assembly.
89413N
2.REMOVE TRANSMISSION REVOLUTION SENSOR (NT)
35206B
3.REMOVE NO. 1 CHECK VALVE SUB-ASSEMBLY
Remove the bolt and check ball cover.
Remove the compression spring and No. 1 check valve sub-assembly from the oil pump assembly.
4.FIX OIL PUMP ASSEMBLY
Place the oil pump assembly on the torque converter assembly.
| *1 | Torque Converter Assembly |
| *2 | Oil Pump Assembly |
35617
5.REMOVE CLUTCH DRUM OIL SEAL RING
Remove the 4 clutch drum oil seal rings from the stator shaft assembly.
6.REMOVE NO. 1 BRAKE PISTON
Using a T30 ''TORX'' socket wrench, remove the 5 bolts, No. 1 brake piston return spring sub-assembly and No. 1 brake piston.
| *1 | No. 1 Brake Piston Return Spring Sub-assembly |
| *2 | No. 1 Brake Piston |
Remove the 2 O-rings from the No. 1 brake piston.
| *1 | O-Ring |
35616B
7.REMOVE CLUTCH DRUM THRUST WASHER
Remove the clutch drum thrust washer from the stator shaft assembly.
35608
8.INSPECT NO. 1 BRAKE PISTON RETURN SPRING SUB-ASSEMBLY
35370
9.REMOVE STATOR SHAFT ASSEMBLY
Put matchmarks on the stator shaft assembly and the front oil pump body sub-assembly.
| *a | Matchmark |
Using a T30 ''TORX'' socket wrench, remove the 8 bolts and stator shaft assembly from the front oil pump body sub-assembly.
35301B
10.REMOVE FRONT OIL PUMP BODY O-RING
Remove the front oil pump body sub-assembly from the torque converter assembly.
Remove the front oil pump body O-ring from the front oil pump body sub-assembly.
35370
11.INSPECT STATOR SHAFT ASSEMBLY
12.INSPECT CLEARANCE OF OIL PUMP ASSEMBLY
35321
13.REMOVE FRONT OIL PUMP DRIVE GEAR
Remove the front oil pump drive gear.
35322
14.REMOVE FRONT OIL PUMP DRIVEN GEAR
Remove the front oil pump driven gear.
35301A
15.REMOVE FRONT OIL PUMP OIL SEAL
Using a screwdriver, pry out the front oil pump oil seal.
| *a | Protective Tape |
Be careful not to damage the front oil pump body sub-assembly.
Wrap the tip of the screwdriver with protective tape.