35000
1.REMOVE AUTOMATIC TRANSMISSION ASSEMBLY
35111
2.REMOVE AUTOMATIC TRANSMISSION HOUSING
35000
3.FIX AUTOMATIC TRANSMISSION ASSEMBLY
35106
4.REMOVE AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
5.REMOVE OIL PUMP ASSEMBLY
Using a screwdriver, disconnect the connector from the transmission revolution sensor (NT).
| *a | Protective Tape |
Use the screwdriver tip before use.
Remove the 11 bolts from the transmission case.
Pull out the oil pump assembly.
Do not damage the oil pump assembly.
Remove the oil pump O-ring from the oil pump assembly.
Remove the 4 clutch drum oil seal rings from the oil pump assembly.
Remove the 3 oil seal rings from the input shaft.
89413N
6.REMOVE TRANSMISSION REVOLUTION SENSOR (NT)
Using a T30 ''TORX'' socket wrench, remove the bolt and transmission revolution sensor (NT) and clamp from the oil pump assembly.
Detach the clamp to remove the transmission revolution sensor (NT) from the clamp.