Home › Drivetrain › CLUTCH › CLUTCH ACCUMULATOR
RM2660E _52 Drivetrain _052808 CLUTCH _0255315 CLUTCH ACCUMULATOR A

CLUTCH  CLUTCH ACCUMULATOR  INSTALLATION  


PROCEDURE

Hide 31490 1.INSTALL CLUTCH ACCUMULATOR ASSEMBLY

C271135

a.

Install the clutch accumulator with the 3 bolts.

Torque:
12 N*m (120 kgf*cm, 9 ft.*lbf)


b.
C271136

Using a union nut wrench, connect the flexible hose tube.

Torque:
15 N*m (155 kgf*cm, 11 ft.*lbf)

NOTICE:

Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).



Hide 31482D 2.INSTALL CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE

Hide 31121 3.INSTALL NO. 1 CLUTCH HOUSING COVER

Hide 4.FILL RESERVOIR WITH BRAKE FLUID

Hide 6.CHECK FLUID LEVEL IN RESERVOIR

Hide 7.INSPECT FOR CLUTCH FLUID LEAK