Home › Drivetrain › JF2A (TRANSFER / 4WD / AWD) › TRANSFER SYSTEM › from 2015.08
RM2660E _52 Drivetrain _052810 JF2A TRANSFER / 4WD / AWD _0255329 TRANSFER SYSTEM C

JF2A TRANSFER / 4WD / AWD  TRANSFER SYSTEM  U0416  Invalid Data Received from Vehicle Dynamics Control Module  


DESCRIPTION

This DTC is output if a wheel speed malfunction signal is sent from the skid control ECU (master cylinder solenoid).

DTC No. DTC Detection Condition
1.

Diagnosis Condition

2.

Malfunction Status

3.

Malfunction Time

4.

Other


Trouble Area
U0416
1.

Ignition switch ON (3 seconds elapse after ignition switch is turned to ON)

2.

Wheel speed sensor malfunction signals from skid control ECU are received

3.

0.06 seconds or more (malfunction signal received 1 or more times) when transfer is switching between high and low, or center differential is switching between free and lock

4.

1 trip detection logic


·

CAN communication system

·

Vehicle stability control system (w/ VSC)

·

Anti-lock brake system (w/o VSC)



PROCEDURE

1.RECONFIRM DTC

b.

Check if the same DTC is output (See page Drivetrain>JF2A (TRANSFER / 4WD / AWD)>TRANSFER SYSTEM>DTC CHECK / CLEAR).

Result
Result Proceed to
DTC U0122 and U0416 are output A
Only DTC U0416 is output (w/ VSC) B
Only DTC U0416 is output (w/o VSC) C
DTC is not output D



A

B

C

D