41450
1.INSTALL DIFFERENTIAL LOCK SHIFT ACTUATOR
Remove any old FIPG material.
Clean the contact surfaces of any residual FIPG material using non-residue solvent.
Apply seal packing to the actuator.
Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent:
Install the actuator within 10 minutes after applying seal packing.
Install the shift fork and actuator to the differential and align the shift fork hole with the shift lock.
Clean the threads of the set bolt and fork shaft with non-residue solvent.
Coat the threads of the set bolt with adhesive.
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent
Install the shift fork shaft set bolt.
Engage the sleeve with the dog clutch of the differential case.
Install the 4 bolts.
41456
2.INSTALL REAR DIFFERENTIAL LOCK COVER WITH POSITION SWITCH
Remove any old FIPG material.
Clean the contact surfaces of any residual FIPG material using non-residue solvent.
Apply seal packing to the cover.
Toyota Genuine Seal Packing 1281, Three Bond 1281 or equivalent
Install the cover within 10 minutes after applying seal packing.
Install the cover with the 3 bolts.
41467A
3.INSTALL REAR DIFFERENTIAL LOCK ACTUATOR PROTECTOR
41170
4.INSTALL DIFFERENTIAL PROTECTOR ASSEMBLY