The multi-information display in the combination meter displays the vehicle height, the state of the height control OFF switch, and system malfunctions. To display items, the multi-information display uses CAN communication between the combination meter and suspension control ECU via the gateway ECU.
Turn the engine switch off.
Connect the intelligent tester to the DLC3.
Check the ECUs connected to the CAN bus for LHD (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM(for LHD)>DIAGNOSIS SYSTEM) or for RHD (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM(for RHD)>DIAGNOSIS SYSTEM).
| Result | Proceed to |
|---|---|
| No malfunction appears | A |
| Malfunction appears (for LHD) | B |
| Malfunction appears (for RHD) | C |
A
(See pageVehicle Interior>METER / GAUGE / DISPLAY>METER / GAUGE SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING)
B
C