Home › Suspension › SUSPENSION CONTROL › ACTIVE HEIGHT CONTROL PUMP AND MOTOR
RM2660E _53 Suspension _052813 SUSPENSION CONTROL _0255369 ACTIVE HEIGHT CONTROL PUMP AND MOTOR A

SUSPENSION CONTROL  ACTIVE HEIGHT CONTROL PUMP AND MOTOR  REMOVAL  


PROCEDURE

Hide 1.DISCHARGE SUSPENSION FLUID PRESSURE

a.
C172938

Connect a hose to the bleeder plug for the height control accumulator and loosen the bleeder plug.


b.

Discharge the suspension fluid pressure.


c.

After the fluid pressure has dropped and oil has drained out, tighten the bleeder plug and remove the hose.

Torque:
6.9 N*m (70 kgf*cm, 61 in.*lbf)


Hide 76625G 2.REMOVE REAR QUARTER PANEL MUDGUARD RH

Hide 52159 3.REMOVE REAR BUMPER COVER

a.

for Standard:

Remove the bumper cover (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(for Standard)>REMOVAL).


b.

w/ Towing Hitch:

Remove the bumper cover (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER (w/ Towing Hitch)>REMOVAL).


c.

w/ Pintle Hook:

Remove the bumper cover (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(w/ Pintle Hook)>REMOVAL).


d.

for Double Swing Out Type:

Remove the bumper cover (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER(for Double Swing Out Type)>REMOVAL).


Hide 58723B 4.REMOVE NO. 1 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR

C179456

a.

Remove the 2 screws, 2 grommets and protector.


Hide 77277R 5.REMOVE FUEL TANK FILLER PIPE PROTECTOR

a.
C172735

Using a T30 "TORX" socket wrench, remove the 3 screws, grommet and pipe protector.


Hide 48999 6.DISCONNECT REAR NO. 6 HEIGHT CONTROL TUBE

a.
C178037

Using a union nut wrench, disconnect the No. 6 height control tube from the pump and motor.


Hide 48965 7.REMOVE HEIGHT CONTROL TUBE CLAMP

a.
C176840E01
0.06,0.384 0.980,0.721 0.921,0.337 10 Height Control Tube Clamp 1.178,0.484 1.824,0.484 false

Disconnect the tube clamp from the hose, then remove the 2 bolts and tube clamp.


Hide 48910A 8.REMOVE HEIGHT CONTROL PUMP AND MOTOR ASSEMBLY

a.
C172672

Disconnect the 2 connectors and 3 clamps.


b.
C172732

Remove the 3 bolts and pump and motor.