Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › CRAWL SWITCH(w/ Entry and Start System) › from 2015.08
RM2660E _54 Brake _052819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0255419 CRAWL SWITCH(w/ Entry and Start System) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  CRAWL SWITCH(w/ Entry and Start System)  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RHD and LHD sides.

·

The procedure listed below is for the LHD side.



PROCEDURE

Hide 84010D 1.INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY (CRAWL SWITCH)

a.
C336982

Attach the 10 claws and install the integration control and panel assembly (CRAWL switch) to the upper console panel sub-assembly.