Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › CRAWL SWITCH(w/o Entry and Start System) › from 2015.08
RM2660E _54 Brake _052819 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0255420 CRAWL SWITCH(w/o Entry and Start System) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  CRAWL SWITCH(w/o Entry and Start System)  REMOVAL  


PROCEDURE

Hide 58804A 1.REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 89299F 2.REMOVE SUSPENSION CONTROL SWITCH (CRAWL SWITCH)

a.

Disconnect the connector.


b.
C338788

Detach the 4 claws and remove the suspension control switch (CRAWL switch) from the upper console panel.

Text in Illustration
V113147

Remove in this Direction