Home › Steering › VARIABLE GEAR RATIO STEERING › VARIABLE GEAR RATIO STEERING SYSTEM › from 2015.08
RM2660E _55 Steering _052825 VARIABLE GEAR RATIO STEERING _0255448 VARIABLE GEAR RATIO STEERING SYSTEM D

VARIABLE GEAR RATIO STEERING  VARIABLE GEAR RATIO STEERING SYSTEM  DIAGNOSIS SYSTEM  


FUNCTION OF WARNING LIGHT AND MESSAGE


a.

If a malfunction occurs during system operation, the master warning light in the combination meter comes on and "Check VGRS System" is displayed on the multi-information display to inform the driver of the system malfunction.



DTC


a.

Normal mode.

i.

DTCs are stored in the VGRS ECU (steering control ECU) and output using the GTS (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).



b.

Test mode.

i.

By switching from normal mode to test mode, the steering sensor and steering actuator assembly can be inspected (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>TEST MODE PROCEDURE).

HINT:

Whether the system is in normal mode or test mode can be checked from the indication on the multi-information display. For details of the indication and how to check, refer to DTC Check/ Clear (See page Steering>VARIABLE GEAR RATIO STEERING>VARIABLE GEAR RATIO STEERING SYSTEM>DTC CHECK / CLEAR).