Home › Steering › STEERING COLUMN › STEERING WHEEL › from 2015.08
RM2660E _55 Steering _052826 STEERING COLUMN _0255456 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  INSTALLATION  


PROCEDURE

Hide 45184 1.INSTALL STEERING WHEEL BOSS LOWER COVER (w/o Steering Heater)

a.

for Type A:

i.

Attach the 4 claws and 2 screws and install the steering wheel boss lower cover.



b.

for Type B:

i.

Attach the 6 claws and install the steering wheel boss lower cover.



Hide 45713A 2.INSTALL STEERING SHAKE DAMPER (w/ Steering Shake Damper)

a.

Install the 2 screws to steering shake damper.


Hide 45116 3.INSTALL NO. 1 STEERING WHEEL ORNAMENT (for Type B)

a.

Attach the 2 claws and 2 bolts, NO. 1 steering wheel ornament


Hide 45117 4.INSTALL NO. 2 STEERING WHEEL ORNAMENT (for Type B)

HINT:

Refer to "INSTALL NO. 1 STEERING WHEEL ORNAMENT".


Hide 84259 5.INSTALL STEERING PAD COVER LH (w/o Steering Pad Switch)

a.

Install the screw and 4 guide pins, install the steering pad cover LH.


Hide 84258 6.INSTALL STEERING PAD COVER RH (w/o Steering Pad Switch)

a.

Install the screw and 4 guide pins, install the steering pad cover RH.


Hide 84250A 7.INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

a.

Attach the 4 claws and 4 guide pins to install the steering pad switch assembly.


b.

Install the 4 screws.


Hide 84247A 8.INSTALL STEERING PAD SWITCH LH

HINT:

Refer to "INSTALL STEERING PAD SWITCH ASSEMBLY".


Hide 84632 9.INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

Hide 45100 11.INSTALL STEERING WHEEL ASSEMBLY

a.

for Type A:

i.
C349293E02
2.74,0.469 2.021,0.25 2.021,0.25 2.708,0.583 true 1.802,0.125 2.063,0.365 0.26,0.24 10 false *a

Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

Text in Illustration
*a Matchmark



b.

for Type B:

i.
C335452E03
2.75,0.5 1.958,0.198 1.958,0.198 2.74,0.594 true 1.771,0.094 1.99,0.281 0.219,0.188 10 false *a

Align the matchmarks on the steering wheel assembly and steering main shaft assembly.

Text in Illustration
*a Matchmark



c.

Install the steering wheel assembly set nut.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


Hide 13.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 15.PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION (w/ VGRS)