Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER (w/o Multi-display) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255465 RADIO RECEIVER(w/o Multi-display) A

AUDIO / VIDEO  RADIO RECEIVER(w/o Multi-display)  INSTALLATION  


PROCEDURE

Hide 86211 2.INSTALL NO. 1 RADIO BRACKET

a.
E336716

Install the bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86212 3.INSTALL NO. 2 RADIO BRACKET

a.
E336715

Install the bracket with the 3 screw.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86140A 4.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

a.

Connect the connectors.


b.
E336714

Insert the radio and display receiver assembly with bracket to attach the 6 claws and 2 clips on its backside.

NOTICE:

When inserting the radio and display receiver assembly with bracket, do not press the knobs on it.



c.
E336713E01
0.926,2.659 1.127,2.871 0.201,0.212 0.968,2.682 1.104,2.833 0.136,0.151 10 A 2.442,2.651 2.642,2.863 0.201,0.212 2.483,2.675 2.619,2.826 0.136,0.151 10 A

Install the radio and display receiver assembly with bracket with the 2 screws and 2 bolts.

Torque:
Bolt : 8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 55680A 5.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55670 6.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55510F 7.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).