Use the same procedures for the LH side and RH side.
The procedures listed below are for the LH side.
86160
1.INSTALL FRONT NO. 1 SPEAKER ASSEMBLY
Connect the speaker connector.
Install the speaker with the 4 screws.
Do not touch the cone part of the speaker.
67602
2.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
74646
3.INSTALL DOOR ASSIST GRIP COVER LH
74240A
4.INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY LH
69278B
5.INSTALL FRONT DOOR INSIDE HANDLE BEZEL LH
67492A
6.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH
7.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).