Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER (w/o Stereo Component Amplifier) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255473 RADIO RECEIVER(w/o Stereo Component Amplifier) A

AUDIO / VIDEO  RADIO RECEIVER(w/o Stereo Component Amplifier)  INSTALLATION  


PROCEDURE

Hide 86211 1.INSTALL NO. 1 RADIO BRACKET

a.

w/o Entry and Start System:

i.
E336724

Install the bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)



b.

w/ Entry and Start System:

i.
E336723

Install the bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)



Hide 86212 2.INSTALL NO. 2 RADIO BRACKET

a.

w/o Entry and Start System:

i.
E336722

Install the bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)



b.

w/ Entry and Start System:

i.
E336721

Install the bracket with the 3 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)



Hide 86120 3.INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET

a.

w/o Entry and Start System:

i.

Connect the connectors.


ii.
E336720E01
1.018,2.078 1.229,2.272 0.21,0.195 1.083,2.1 1.218,2.245 0.135,0.145 10 A 2.242,2.078 2.455,2.272 0.213,0.195 2.284,2.1 2.419,2.245 0.135,0.145 10 A

Install the radio receiver with the 2 screws and 2 bolts.

Torque:
Bolt A : 8.5 N*m (87 kgf*cm, 75 in.*lbf)



b.

w/ Entry and Start System:

i.

Connect the connectors.


ii.
E336719E01
0.833,2.633 1.069,2.851 0.236,0.218 0.891,2.663 1.039,2.833 0.148,0.170 10 A 2.368,2.627 2.604,2.845 0.236,0.218 2.426,2.658 2.574,2.827 0.148,0.170 10 A

Install the radio receiver with the 2 screws and 2 bolts.

Torque:
Bolt A : 8.5 N*m (87 kgf*cm, 75 in.*lbf)



Hide 55412C 4.INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

Hide 55680A 5.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55670 6.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55510F 7.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).