Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255477 AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/o Stereo Component Amplifier)  Cassette Tape cannot be Ejected  


PROCEDURE

1.CHECK OPERATION
a.

Press "EJECT" and check the operation.

i.

Press the cassette tape EJECT switch of the radio receiver assembly for 2 seconds or more and check that the cassette tape is ejected.

OK:

The cassette tape is ejected.





OK

2.CHECK CASSETTE TAPE

NG

2.CHECK CASSETTE TAPE
a.

Check the cassette tape.

i.

Check that the ejected cassette tape does not have a peeled label, a cassette body deformation or any other defect.

OK:

No fault on the cassette tape.





OK

3.REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK

NG

CASSETTE TAPE IS FAULTY

3.REPLACE CASSETTE TAPE WITH ANOTHER AND RECHECK
a.

Replace the cassette tape with a normal one and check if the same problem occurs again.

OK:

Malfunction disappears.




OK

CASSETTE TAPE IS FAULTY

NG