Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(w/o Navigation System) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255479 AUDIO AND VISUAL SYSTEM(w/o Navigation System) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/o Navigation System)  Cellular Phone cannot Send/Receive  


PROCEDURE

1.CHECK "BLUETOOTH" SETTINGS
a.

Check if the "Bluetooth" settings are correct.

OK:

"Bluetooth" settings are correct.




OK

2.CHECK CELLULAR PHONE

NG

SET CORRECTLY

2.CHECK CELLULAR PHONE
a.

Check if the cellular phone is "Bluetooth" compatible.

HINT:

Some versions of "Bluetooth" compatible cellular phones may not function.


OK:

Phone is "Bluetooth" compatible.




OK

3.CHECK SETTINGS

NG

END (ONLY A "BLUETOOTH" COMPATIBLE CELLULAR PHONE CAN BE USED)

3.CHECK SETTINGS
a.

Check if the cellular phone functions.

HINT:

The cellular phone is unable to call under any of the following conditions:

·

The cellular phone is locked.

·

The directory is being transferred.

·

The line is crossed.

·

Outside service range.

·

The power is off.

·

The cellular phone is not connected to "Bluetooth" ("BT" is displayed while connected).



OK:

None of the above conditions exist.




OK

4.CHECK CELLULAR PHONE

NG

SET CORRECTLY

4.CHECK CELLULAR PHONE
a.

Check if the cellular phone can make a call.

HINT:

When the battery is low, calls cannot be made or received.


OK:

Cellular phone can make a call.




OK

5.CHECK RECEPTION

NG

REPAIR OR REPLACE CELLULAR PHONE

5.CHECK RECEPTION
a.

Set the cellular phone so that it can receive calls.


b.

Place the cellular phone close to the radio receiver assembly.


c.

Check if the cellular phone has reception according to the radio receiver assembly.

OK:

Cellular phone has reception.




OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG