| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-10 | System microcomputer malfunction | ·
Multi-media interface ECU ·
USB device or "iPod" |
| CB-11 | Media interface microcomputer malfunction | |
| CB-12 | CD-LSI (large scale integration) malfunction |
After the inspection is completed, clear the DTCs.
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Turn the engine switch off.
When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
NEXT
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/o Navigation System)>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTC occurs again.
If DTCs are detected frequently, replace the multi-media interface ECU.
Malfunction disappears.
OK
NG