| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| CB-52 | No playable files on the "iPod" | "iPod" |
| CB-7E | No playable files on the USB device | USB device |
After the inspection is completed, clear the DTCs.
Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.
Check if playable files are present on the USB device or "iPod".
Refer to System Description for playable files (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/o Navigation System)>SYSTEM DESCRIPTION).
| Result | Proceed to |
|---|---|
| No playable files exist. | A |
| Playable files exist. | B |
A
B
Turn the engine switch off.
When one of these DTCs has been stored, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.
Turn the engine switch on (ACC).
Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.
NEXT
Clear the DTCs (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM(w/o Navigation System)>DTC CHECK / CLEAR).
NEXT
Recheck for DTCs and check if the same DTC occurs again.
If DTCs are detected frequently, replace the multi-media interface ECU.
Malfunction disappears.
OK
NG