When replacing the radio and display receiver assembly, it is necessary to perform the vehicle contract setting for Connected Services (w/ Connected Services Function).
Check that the disc is not deformed or cracked.
No deformation or cracks on the disc
OK
NG
Check the disc.
The disc is clean.
If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
Do not use a conventional record cleaner or anti-static preservative.
OK
NG
Check if the problem recurs using another disc.
The problem does not occur.
OK
NG
Check that the radio and display receiver assembly is properly installed (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER (w/o Multi-display)>INSTALLATION).
Radio and display receiver assembly is properly installed.
OK
NG