Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (w/ Multi-display) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255488 AUDIO AND VISUAL SYSTEM(w/ Multi-display) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/ Multi-display)  Voice is not Recognized  


PROCEDURE

1.CHECK CONDITION
a.

Refer to the owner's manual and follow its instructions to check that the voice recognition level of the system is not too low for a particular voice.

Result
Result Proceed to
System voice recognition level is low with any voice. A
System voice recognition level is low only for a particular voice. B

HINT:

System voice recognition level varies depending on voice and pronunciation. This is not a malfunction.




A

2.CHECK MICROPHONE (OPERATION CHECK)

B

END

2.CHECK MICROPHONE (OPERATION CHECK)
a.
E302789

Enter the "Microphone Check" screen. [Refer to Check Microphone Check in Operation Check (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (w/ Multi-display)>OPERATION CHECK)]


b.

When voice is input into the microphone, check that the microphone input level meter changes according to the input voice.


c.

Select the recording switch and perform voice recording.

·

Select the recording switch with the blower motor of the air conditioning system stopped. If an outlet of the air conditioning system is facing the microphone, noise may be recorded.

·

Voice can be recorded up to 5 seconds.



d.

Check that the recording indicator remains on while recording and that the recorded voice is played normally without noise or distortion.

OK:

All check results are normal.




OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY