Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER (w/ Multi-display) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255464 RADIO RECEIVER(w/ Multi-display) A

AUDIO / VIDEO  RADIO RECEIVER(w/ Multi-display)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 55449C 3.REMOVE NO. 2 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55403C 4.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY LH

Hide 55448A 5.REMOVE NO. 1 INSTRUMENT PANEL FINISH PANEL CUSHION

Hide 55402C 6.REMOVE LOWER INSTRUMENT PANEL PAD SUB-ASSEMBLY RH

Hide 55406B 7.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Hide 55510F 8.REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 55670 9.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55680A 10.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 86130A 12.REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

a.
E336726

Remove the 2 screws and 2 bolts.


b.
E336727

Pull the multi-media module receiver assembly to detach the 5 claws on the backside of the multi-media module receiver assembly.


c.

Disconnect the connectors and remove the multi-media module receiver assembly.


Hide 86211 13.REMOVE NO. 1 RADIO BRACKET

a.
E332492

Remove the 3 screws and No. 1 radio bracket.


Hide 86212 14.REMOVE NO. 2 RADIO BRACKET

a.
E332493

Remove the 3 screws and No. 2 radio bracket.