Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (w/ Multi-display) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255488 AUDIO AND VISUAL SYSTEM(w/ Multi-display) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(w/ Multi-display)  USB Audio System Recognition/Play Error  


WIRING DIAGRAM

E329641E03
4.594,2.76 6.438,3.125 1.844,0.365 10 false Multi-media Module Receiver Assembly 0.688,2.688 2.979,2.885 2.292,0.198 10 false No. 1 Stereo Jack Adapter Assembly 3.51,2.302 3.656,2.448 0.146,0.146 10 false * 1.729,1 2.094,1.167 0.365,0.167 10 false US1+ 1.708,1.802 2.083,1.958 0.375,0.156 10 false UGD1 1.771,1.385 2.115,1.563 0.344,0.177 10 false US1- 1.698,0.604 2.104,0.771 0.406,0.167 10 false USV1 2.219,0.5 2.313,0.656 0.094,0.156 10 false 1 2.229,0.906 2.344,1.073 0.115,0.167 10 false 3 2.229,1.646 2.333,1.823 0.104,0.177 10 false 4 2.229,1.26 2.323,1.427 0.094,0.167 10 false 2 4.708,0.49 4.813,0.656 0.104,0.167 10 false 1 4.708,0.885 4.813,1.063 0.104,0.177 10 false 3 4.708,1.656 4.813,1.833 0.104,0.177 10 false 4 4.719,2.042 4.802,2.229 0.083,0.188 10 false 5 4.708,1.271 4.813,1.438 0.104,0.167 10 false 2 4.938,0.604 5.333,0.771 0.396,0.167 10 false USV1 4.927,1.01 5.344,1.177 0.417,0.167 10 false US1+ 4.927,1.781 5.375,1.948 0.448,0.167 10 false UGD1 4.938,1.406 5.313,1.594 0.375,0.188 10 false US1- 4.927,2.198 5.344,2.375 0.417,0.177 10 false USG1 0.844,3.333 3.323,3.552 2.479,0.219 10 false : Data Signal (USB Communication Line) 0.698,2.51 0.948,2.688 0.25,0.177 10 false t1 4.615,2.563 4.896,2.74 0.281,0.177 10 false z1 3.729,3.302 4.49,3.51 0.76,0.208 10 false *: Shielded

CAUTION / NOTICE / HINT

HINT:
·

When a large amount of data is in a USB device, it may take a while before play begins.

·

When using a USB device, files that are protected by copyright cannot be played.

·

When files are not played in the sorted order, perform the following procedure before inspection.

(a)

Add numbers in front of the file names.

(b)

Put the files in a folder and copy the folder data to the USB device.




PROCEDURE

1.CHECK USB DEVICE OR "iPod"
a.

Disconnect the USB device or "iPod" from the No. 1 stereo jack adapter assembly.


b.

Check if playable files are present on the USB device or "iPod".

HINT:

Refer to System Description for playable files (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (w/ Multi-display)>SYSTEM DESCRIPTION).



c.

Check if the USB device is a compatible format or "iPod" is a compatible version.

HINT:

Refer to System Description for compatible formats and versions (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (w/ Multi-display)>SYSTEM DESCRIPTION).


Result
Result Proceed to
No playable files exist, or incompatible device format or version. A
Playable files exist, and compatible device format or version. B



A

USB DEVICE FORMAT WAS INCOMPATIBLE, "iPod" VERSION WAS INCOMPATIBLE, OR NO PLAYABLE FILES PRESENT

B

2.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
2.CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY)
a.

Disconnect the z1 multi-media module receiver assembly connector.


b.

Disconnect the t1 No. 1 stereo jack adapter assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
z1-1 (USV1) - t1-1 (USV1) Always Below 1 Ω
z1-2 (US1-) - t1-2 (US1-) Always Below 1 Ω
z1-3 (US1+) - t1-3 (US1+) Always Below 1 Ω
z1-4 (UGD1) - t1-4 (UGD1) Always Below 1 Ω
z1-1 (USV1) or t1-1 (USV1) - Body ground Always 10 kΩ or higher
z1-2 (US1-) or t1-2 (US1-) - Body ground Always 10 kΩ or higher
z1-3 (US1+) or t1-3 (US1+) - Body ground Always 10 kΩ or higher
z1-4 (UGD1) or t1-4 (UGD1) - Body ground Always 10 kΩ or higher
z1-5 (USG1) - Body ground Always 10 kΩ or higher




OK

3.CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK MULTI-MEDIA MODULE RECEIVER ASSEMBLY
a.
U166537E01
1.646,0.194 1.898,0.371 0.252,0.177 10 t1 0.4,0.69 0.816,0.863 0.416,0.173 10 USV1 2.542,0.69 2.957,0.863 0.416,0.173 10 UGD1 0.917,0.773 1.041,0.773 1.041,0.773 1.305,1.008 false 2.504,0.773 2.379,0.773 2.379,0.773 2.115,1.008 false

Reconnect the z1 multi-media module receiver assembly connector.


b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
t1-1 (USV1) - t1-4 (UGD1) Engine switch on (ACC) 4.5 to 5.5 V


Text in Illustration
*a Front view of wire harness connector
(to No. 1 Stereo Jack Adapter Assembly)



OK

4.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK

NG

REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY

4.FORMAT USB DEVICE OR RESTORE "iPod" AND RECHECK
a.

Delete all files in the USB device or "iPod" and format/restore it.


b.

Save the data again and check if it can be played on the in-vehicle device.

NOTICE:

Formatting a USB device or restoring an "iPod" erases all music on the device.

Ensure that backup music data is available before performing this operation.


OK:

Malfunction disappears.




OK

END

NG

5.REPLACE USB DEVICE OR "iPod"
5.REPLACE USB DEVICE OR "iPod"
a.

Turn the engine switch off.

HINT:

When this malfunction occurs, it is necessary to turn off the engine switch to make it possible for the vehicle to recognize a new device when it is connected.



b.

Turn the engine switch on (ACC).


c.

Connect a known good USB device or "iPod" to the No. 1 stereo jack adapter assembly.

HINT:
·

If the malfunction occurred when a USB device was in use, use another USB device for the inspection. If the malfunction occurred when an "iPod" was in use, use another "iPod" for the inspection.

·

Refer to System Description for compatible formats and versions (See page Audio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM (w/ Multi-display)>SYSTEM DESCRIPTION).





NEXT

6.CHECK USB DEVICE OR "iPod"
6.CHECK USB DEVICE OR "iPod"
a.

Check if the USB device or "iPod" is recognized by the multi-media module receiver assembly, or if information such as track, artist and album names is displayed on the screen.

OK:

USB device or "iPod" is recognized or track information such as track, artist and album names is displayed.




OK

USB DEVICE OR "iPod" WAS INCOMPATIBLE OR DEFECTIVE

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE