Home › Audio / Visual / Telematics › AUDIO / VIDEO › HARD DISK DRIVE › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052828 AUDIO / VIDEO _0255490 HARD DISK DRIVE A

AUDIO / VIDEO  HARD DISK DRIVE  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 86130A 3.REMOVE MULTI-MEDIA MODULE RECEIVER ASSEMBLY WITH BRACKET

Hide 86271L 5.REMOVE HARD DISC

a.
E304986

Remove the 3 screws.


b.
E304990

Move the cover in the direction of the arrow shown in the illustration to remove it.


c.
E304987

Move the cover in the direction of the arrow shown in the illustration to remove it.