Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › MULTI-DISPLAY (w/ Navigation System) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255491 MULTI-DISPLAY(w/ Navigation System) A

NAVIGATION / MULTI INFO DISPLAY  MULTI-DISPLAY(w/ Navigation System)  INSTALLATION  


PROCEDURE

Hide 86117 1.INSTALL MULTI-DISPLAY CONTROLLER BRACKET

a.

Install the multi-display controller bracket with the 4 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 86110B 2.INSTALL MULTI-DISPLAY ASSEMBLY

a.

Connect the connectors.


b.
E339805

Insert the multi-display assembly and attach the 3 clips and 4 claws on its backside.

NOTICE:

When inserting the multi-display assembly, do not press the knobs on it.



c.
E336768E01
2.922,3.112 3.068,3.261 0.146,0.149 10 A 0.438,3.116 0.585,3.265 0.146,0.149 10 A

Install the multi-display assembly with the 2 screws and 2 bolts.

Torque:
Bolt A : 8.5 N*m (87 kgf*cm, 75 in.*lbf)


Hide 55680A 3.INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55670 4.INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55510F 5.INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).