Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › MULTI-DISPLAY (w/ Navigation System) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255491 MULTI-DISPLAY(w/ Navigation System) A

NAVIGATION / MULTI INFO DISPLAY  MULTI-DISPLAY(w/ Navigation System)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 55510F 3.REMOVE NO. 1 SPEAKER OPENING COVER ASSEMBLY

Hide 55670 4.REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 55680A 5.REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

Hide 86110B 6.REMOVE MULTI-DISPLAY ASSEMBLY

a.
E336768

Remove the 2 screws and 2 bolts.


b.
E339804

Pull the multi-display assembly to detach the 3 clips and 4 claws on the backside of the multi-display assembly.


c.

Disconnect the connectors and remove the multi-display assembly.


Hide 86117 7.REMOVE MULTI-DISPLAY CONTROLLER BRACKET

a.
E332532

Remove the 4 screws and multi-display controller bracket.