86860
1.INSTALL NAVIGATION ANTENNA ASSEMBLY
for LHD:
Install the navigation antenna assembly with the 2 screws.
Attach the 2 clamps.
for RHD:
Install the navigation antenna assembly with the 2 screws.
Attach the 2 clamps.
55401E
2.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
4.CHECK SRS WARNING LIGHT