Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Instrument Panel Side) › from 2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255492 NAVIGATION ANTENNA(for Instrument Panel Side) A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Instrument Panel Side)  INSTALLATION  


PROCEDURE

Hide 86860 1.INSTALL NAVIGATION ANTENNA ASSEMBLY

a.

for LHD:

i.

Install the navigation antenna assembly with the 2 screws.


ii.

Attach the 2 clamps.



b.

for RHD:

i.

Install the navigation antenna assembly with the 2 screws.


ii.

Attach the 2 clamps.



Hide 55400 2.INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide 3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).