Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION ANTENNA (for Instrument Panel Side) › 2014.08–2015.08
RM2660E _56 Audio / Visual / Telematics _052829 NAVIGATION / MULTI INFO DISPLAY _0255492 NAVIGATION ANTENNA(for Instrument Panel Side) A

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION ANTENNA(for Instrument Panel Side)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).


Hide 55401E 3.REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Hide 86860 4.REMOVE NAVIGATION ANTENNA ASSEMBLY

a.

for LHD:

i.
E247530

Detach the 2 clamps.


ii.

Remove the 2 screws and navigation antenna assembly.



b.

for RHD:

i.
E247531

Detach the 2 clamps.


ii.

Remove the 2 screws and navigation antenna assembly.